| Cart Total:
Menu
ISO 3951-1:2013: Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (e-standard)

ISO 3951-1:2013: Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (e-standard)

PDF, 102 pages, Published 2013
Dimensions: 81/2 x 11
Item Number: T960E

Member Price: $259.00

List Price: $259.00
Looking to purchase to post on your company's Intranet?

Keywords

  • sampling procedures for inspection by variables
  • specification for single sampling plans
  • acceptance quality limit (AQL)
  • lot-by-lot inspection
  • single quality characteristic

Description

ISO 3951-1:2013 specifies an acceptance sampling system of single sampling plans for inspection by variables. It is indexed in terms of the acceptance quality limit (AQL) and is designed for users who have simple requirements. (A more comprehensive and technical treatment is given in ISO 3951-2.) ISO 3951-1:2013 is complementary to ISO 2859-1.

The objectives of the methods laid down in ISO 3951-1:2013 are to ensure that lots of acceptable quality have a high probability of acceptance and that the probability of not accepting inferior lots is as high as practicable. This is achieved by means of the switching rules, which provide the following:

  • an automatic protection to the consumer (by means of a switch to tightened inspection or discontinuation of sampling inspection) should a deterioration in quality be detected;
  • an incentive (at the discretion of the responsible authority) to reduce inspection costs (by means of a switch to a smaller sample size) should consistently good quality be achieved.

In ISO 3951-1:2013, the acceptability of a lot is implicitly determined from an estimate of the percentage of nonconforming items in the process, based on a random sample of items from the lot.

ISO 3951-1:2013 is intended for application to a continuing series of lots of discrete products all supplied by one producer using one production process. If there are different producers or production processes, ISO 3951-1:2013 is applied to each one separately.

ISO 3951-1:2013 is intended for application to a single quality characteristic that is measurable on a continuous scale. For two or more such quality characteristics, see ISO 3951-2.