Menu
Quality Inspector Certification CQI

References - Quality Inspector Certification - CQI

References

These references support the topic areas in the CQI Body of Knowledge. They are used to write and review the questions in the test question pool. To determine which references you need, review the CQI Body of Knowledge. Determine which topic areas you need to study further. Then review this reference list to identify those that support your needs.

Note: ASQ Certification Board does not endorse any one particular reference source.

  • ASME Y14.5M-2009, Dimensioning and Tolerancing.
  • Benbow, Donald W., H. Fred Walker and Ahmad K. Elshennawy, The Certified Quality Technician Handbook, Milwaukee, Wisconsin: ASQ Quality Press, 2003.
  • Bucher, Jay L., The Metrology Handbook, 2nd ed., Milwaukee, WI, ASQ Quality Press, 2012.
  • De Feo, Joseph A., Juran's Quality Handbook, 7th ed., New York, McGraw-Hill, 2017.
  • Farago, Francis T., Handbook of Dimensional Measurement, 3rd ed., New York: Industrial Press, 1994. ISBN 0831130539.
  • Feigenbaum, Armand V., Total Quality Control, 3rd ed., Revised, New York: McGraw-Hill Publishing Co., 1991. ISBN 0070203547.
  • Grant, Eugene L., and Richard S. Leavenworth, Statistical Quality Control, 7th ed., New York: McGraw-Hill Publishing Co., 1996.
  • Griffith, Gary K., Geometric Dimensioning and Tolerancing: Applications and Inspection, 2nd ed., Englewood Cliffs, NJ: Prentice Hall, 2001. ISBN 0130604631.
  • Griffith, Gary K., The Quality Technician's Handbook, 5th ed., Englewood Cliffs, NJ: Prentice Hall, 2002.
  • Griffith, Gary K., The Quality Technician's Handbook, 6th ed., Englewood Cliffs, NJ: Prentice Hall, 2012. ISBN 0132621282.
  • Gryna Jr., Frank M.,Richard Chua, and Joseph De Feo, Quality Planning and Analysis, 5th ed., New York: McGraw-Hill Publishing Co., 2007.
  • Juran, Joseph M., Juran's Quality Handbook, 5th ed., New York: McGraw-Hill Publishing Co., 1999.
  • Meadows, James D., Geometric Dimensioning and Tolerancing: Applications and Techniques for Use in Design, Manufacturing, and Inspection, Marcel Dekker, 1995. ISBN 0824793099.
  • Montgomery, Douglas C., Introduction to Statistical Quality Control, 5th ed., New York: John Wiley and Sons, Inc., 2004. ISBN-13 978-0471656319.
  • Morris, Alan S., Measurement and Calibration Requirements for Quality Assurance to ISO 9000, Revised ed., New York: Wiley, 1997. ISBN 0471976857.
  • Russell, J.P., ed., ASQ Quality Audit Division, The ASQ Auditing Handbook, 4th ed., Milwaukee ASQ Quality Press, 2012.
  • Suntag, Charles, Inspection and Inspection Management, Milwaukee, Wisconsin: ASQC Quality Press, 1993. ISBN 0873891740.
  • Tague, Nancy R., The Quality Toolbox, 2nd ed., Milwaukee, WI: ASQ Quality Press, 2005.
  • Walker, H. Fred, Ahmad K. Elshennawy, Bhisham C. Gupta, Mary McShane-Vaughn, The Certified Quality Inspector Handbook, 2nd ed., ASQ Quality Press, 2013.
  • Walker, H. Fred, Elshennawy, Ahmad K, Gupta, Chisham C. McShane-Vaughn, Mary, The Certified Quality Inspector Handbook, ASQ Quality Press, 2009.

Books with links are available from ASQ Quality Press.

Return to Quality Inspector Home.

Featured Advertisers