Auto Industry Gets Serious About Lighter Materials

Back to QNT News

Post & Courier (Charleston, SC)

June 11, 2014

Roofs made of carbon fiber. Plastic windshields. Bumpers fashioned out of aluminum foam. What sounds like a science experiment could be your next car.

While hybrids and electrics may grab the headlines, the real frontier in fuel economy is the switch to lighter materials.

Automakers have been experimenting for decades with lightweighting, as the practice is known, but the effort is gaining urgency with the adoption of tougher gas mileage standards. To meet the governmentís goal of nearly doubling average fuel economy to 45 mpg by 2025, cars need to lose some serious pounds.

Lighter doesnít mean less safe. Cars with new materials are already acing government crash tests. Around 30% of new vehicles already have hoods made of aluminum, which can absorb the same amount of impact as steel. Some car companies are teaming up with airplane makers, which have years of crash simulation data for lightweight materials.

Ford gave a glimpse of the future last week with a lightweight Fusion car. The prototype, developed with the U.S. Department of Energy, is about 800 pounds lighter than a typical Fusion thanks to dozens of changes in parts and materials.

The instrument panel consists of a carbon fiber and nylon composite instead of steel. The rear window is made from the same tough but thin plastic that covers your cellphone.

The car has aluminum brake rotors that are 39% lighter than cast iron ones and carbon fiber wheels that weigh 42% less than aluminum ones.

Because itís lighter, the prototype can use the same small engine as Fordís subcompact Fiesta, which gets an estimated 45 mpg on the highway.

The car wonít be in dealerships anytime soon. For one thing, itís prohibitively expensive. Its seats, for example, cost up to $73 apiece because they have carbon fiber frames. The same seats with steel frames are $12.

Still, prototypes are helping Ford and other companies figure out the ideal mix of materials.

These are the technologies that will creep into vehicles in the next three to five years, said Matt Zaluzec, Fordís technical leader for materials and manufacturing research.

Some vehicles have already made a lightweight leap. Land Roverís 2013 Range Rover, which went on sale last year, dropped around 700 pounds with its all-aluminum body, while the new Acura MDX shed 275 pounds thanks to increased use of high-strength steel, aluminum and magnesium.

Ford has unveiled an aluminum-body 2015 F-150 pickup, which shaves up to 700 pounds off the current version. The truck goes on sale later this year.

The average vehicle has gained more than 800 pounds over the last 12 years and now tops out at just over 3,900 pounds, according to government data. Not only have cars gotten bigger, but safety features like air bags and more crash-resistant frames have also added weight. General Motors Chevrolet Volt electric car has to drag around a 400-pound battery.

Morgan Stanley estimates than shaving 110 pounds off each of the 1 billion cars on the worldís roads could save $40 billion in fuel each year.

Lightweighting is going to be with us for a long time, said Hesham Ezzat, a technical fellow at GM. Every manufacturer is going to have to leverage their entire palette of materials.

Hereís a look at some of the materials automakers will use to shed the pounds:

High-strength steel: Steel isnít going away. Chances are, high-strength steel a lighter and stronger steel mixed with other elements such as nickel and titanium already makes up at least 15% of your carís weight. Some newer models, such as the Cadillac ATS, are nearly 40% high-strength steel.

High-strength steel costs about 15% more than regular steel, but less than other materials such as aluminum. It still weighs more than aluminum, but continuing advances could cut that weight. Extremely thin but strong steels made with nanotechnology which manipulates the metal at the molecular level could be on cars by 2017.

Aluminum: The typical vehicle already contains around 340 pounds of aluminum, or about 10% of the weight of a midsize car. Itís most commonly used in engines, wheels, hoods and trunk lids.

Aluminum is lighter than steel and easy to form into a variety of parts. Itís also more corrosion-resistant than steel.

There are drawbacks. The supply of steel is many times greater than that of aluminum, and will be for many years. Aluminum also costs 30% more than conventional steel, and a rapid increase in demand could make aluminum prices volatile.

Still, consultant McKinsey and Co. predicts aluminumís use in the auto industry will triple by 2030.

Carbon fiber: Airplanes use it. Boats use it.

Carbon fiber is a high-strength material made from woven fibers. Itís half the weight of steel, it is resistant to dents and corrosion, and it offers the most design flexibility, since it can be shaped in ways that stamped metal canít.

But the high cost of carbon fiber and the time it takes to form it into parts are huge barriers for the auto industry.

Petroleum-based strands must go through several stages before theyíre woven into carbon fiber. After that, it takes five minutes to form the material into a part, compared with one minute for steel or aluminum. On an assembly line producing a car every minute, thatís simply too long. Plus, carbon fiber is five to six times more expensive than steel, according to McKinsey.

Automakers, the government and others are experimenting with cheaper materials for the fibers and faster-curing resins that could shorten the time to form parts. McKinsey believes that could significantly shrink the price gap by 2030.

Until then, expect to see carbon fiber in limited amounts on low-volume or luxury cars. The Chevrolet Corvette Stingray, which starts at $51,000, has a carbon fiber hood and roof, while the $41,350 BMW i3 electric car is built around a carbon fiber frame.

Copyright © LexisNexis, a division of Reed Elsevier Inc. All rights reserved.  
Terms and Conditions    Privacy Policy

Quality News Today is an ASQ member benefit offering quality related news
from around the world every business day.

ASQ is a global community of people passionate about quality, who use the tools, their ideas and expertise to make our world work better. ASQ: The Global Voice of Quality.