Library

Practical Reliability Testing of Structures Under Road Loadings

by Julio Pulido, PhD;

Examples of mechanical structures under road and self-induced vibration are presented. Vibration testing planning using finite element techniques associated with several f..

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:RAMS 2011 Proceedings,Accelerated Life Testing, Strength-Load, Product Design/Reliability

Reliability Growth Planning for Discrete-Use Systems

by J. Brian Hall, Ph.D.;

This paper presents new RG planning methodology for discrete-use systems being utilized within the DoD...

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:RAMS 2011 Proceedings,Reliability Growth, Reliability Model, Product Design/Reliability

Typical Super Early Degradation Failures of Mass-Produced Complex Electronics

by David E. Verbitsky, Ph. D;

Early failures (EFs), occurring during..

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:Failure Analysis, Product Reliability, RAMS 2011 Proceedings, Reliability Model

The Web-Accessible Repository of Physics-based Models (WARP)

by David Nicholls, CRE; Aaron Riesbeck;

The current trend in systems engineeri..

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:Failure Analysis, Failure Rate, Product Reliability, RAMS 2011 Proceedings, Reliability Model

Reliability Predictions to Support a Design For Reliability Program

by Lori E. Bechtold;

Industry and the DoD are working together to revamp reliability prediction processes so that they provide the needed information to the design process in a timely fashion as well as provide relevant information for decisions in testing and sustainable......

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:Design Reliability, Failure Rate, Failure Analysis, Product Reliability, RAMS 2011 Proceedings, Reliability Analysis/Prediction/Estimation

Optimized Acoustic Microscopy Screening for Multilayer Ceramic Capacitors

by Schwartz, Stanley W.; Kostic, Andrew D.

An optimized acoustic microscopy screening process has been developed for multi layer ceramic chip capacitors that identifies potential early life failures for removal. Accelerated life testing has validated the effectiveness of the methodology...

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:RAMS 2011 Proceedings, Accelerated Life Testing, Failure Analysis, Product Reliability

Dynamic Fault Tree Analysis Based On The Structure Function

by Jean-Marc Roussel, PhD; Jean-Jacques Lesage, PhD; Guillaume Merle, PhD;

Fault Tree..

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:Fault Tree Analysis, Product Reliability, RAMS 2011 Proceedings, Reliability Analysis/Prediction/Estimation

Reliability Growth and the Caveats of Averaging: a Centaur Case Study

by Joseph R. Fragola, D. Sc., PE; Elisabeth L. Morse; Blake F. Putney;

Reliability Growth..

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:Failure Rate, Product Reliability, RAMS 2011 Proceedings, Reliability Analysis/Prediction/Estimation

Analyzing Interconnection Design Safety Using Bent Pin Analysis

by Nathaniel W. Ozarin,;

Low-tech hazards can cause catastrophic results in safety- critical and other systems...

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:Design Review, Design Reliability, Fault Tree Analysis, Product Reliability, RAMS 2011 Proceedings, Reliability Model, Systems Engineering

Human Rating of Launch Vehicles: Historical and Potential Future Risk

by Joseph R. Fragola, P.E., D.Sc.; Benjamin J. Franzini;

Approaches..

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:Conceptual Design, Design Reliability, Product Reliability, RAMS 2011 Proceedings, Systems Engineering

ASQ News

Take a look at the presentations from the 2014 ASQ Technical Communities Conference.

 

 

 

RAMS 2015