Library

Analyzing Interconnection Design Safety Using Bent Pin Analysis

by Nathaniel W. Ozarin,;

Low-tech hazards can cause catastrophic results in safety- critical and other systems...

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:Design Review, Design Reliability, Fault Tree Analysis, Product Reliability, RAMS 2011 Proceedings, Reliability Model, Systems Engineering

Risk Assessment Using Design Review Based On Failure Mode

by Schmidt, Roland; Riedel, Gernot J.; Kangas, Klaus

Sustainability requires better reliability possibly improved by risk assessment during product development. Besides FMEA Design Review Based on Failure Mode is a structured method to perform risk assessment. Experience and best practice of this method.....

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:RAMS 2011 Proceedings, Product Reliability, Design Review

Model-driven Automated Software FMEA

by Snooke, Neal; Price, Chris

This paper will describe how software FMEA can be automated both for low-level languages intended for safety critical embedded systems, and also for model-driven software developments...

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:RAMS 2011 Proceedings, Product Reliability, Design Review, Software Reliability

Using FMECA to Design Sustainable Products

by Janasak, Keith M.; Herman, Richard M.

For many years now Failure Mode, Effects and Criticality Analysis (FMECA) has been a very effective technique used for identifying possible failures and mitigating their effect. Although mainly used to identify failures as.....

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:RAMS 2011 Proceedings, Product Reliability, Design Review

Effective Oversight

by Wasserman, Gary S.

The reliability group of a large defense contractor must report to management their progress in meeting Design for Reliability (DFR) objectives. Management is requesting metrics that they can use to track DFR milestones at each milestone in the phase.....

  • Filetype: pdf
  • Publish date: 2011-01
  • Keywords:RAMS 2011 Proceedings, Product Reliability, Design Review

Probability of Failure of Safety-Critical Systems

by Bérenguer, Christophe ; Brissaud, Florent ; Barros, Anne ;

Formulas are proposed for availability assessment of k-out%2..

  • Filetype: pdf
  • Publish date: 2010-01
  • Keywords:RAMS 2010 Proceedings, Failure Analysis, Product Reliability, Design Review, Reliability Model

Risk Assessment In Research Projects

by Roland Schmidt;

Failure Mode and Effect Analysis (FMEA) and Design
Review Based on Failure Mode (DRBFM) are discussed,
experiences are shared, and adapations are shown how FMEA and DRBFM can be a used in a creative and! structured way in research projects...

  • Filetype: pdf
  • Publish date: 2010-01
  • Keywords:RAMS 2010 Proceedings,Design Review, FMEA, Risk Assessment

How to Close the Gap Between Hardware and Software Using FMEA

by Bidokhti, Nematollah

Annual Reliability and Maintainability Symposium (RAMS), 2007 Proceedings. Session 08B: Software Reliability in Product Development. Moderator: Charles W. Plotkin, Ford Motor Company...

  • Filetype: pdf
  • Publish date: 2007-06
  • Keywords:RAMS 2007 Proceedings,FMEA, Design Review, Software Reliability, Design Reliability

ASQ News

Watch ASQ Weekly for updates!!     

 

 

RAMS 2014