Library

Risk Informed Design Modeling Process

by Chris Mattenberger;

As part of NASA’s Constellation Program the Altair
lun..

  • Filetype: pdf
  • Publish date: 2010-01
  • Keywords:RAMS 2010 Proceedings, Conceptual Design, Reliability Model, Reliability

Consideration for CDM breakdown and reliability designing in the latest semiconductor technology

by Wakai, Nobuyuki; Kobira, Yuji

According to the result of failure analysis for CDM failed semiconductor device, it was found that gate oxide breakdown was critical failure mode in CDM...

  • Filetype: pdf
  • Publish date: 2009-02
  • Keywords:RAMS 2009 Proceedings,Design Reliability, Electronics, Engineering

Bayesian Reliability Demonstration Test in a Design for Reliability Process

by Jiang, Mingxiao; Dummer, Daniel J.

This paper illustrates how a Bayesian reliability demonstration test (BRDT) approach can be, and sometimes must be, integrated into a Design for Reliability (DFR) process...

  • Filetype: pdf
  • Publish date: 2009-02
  • Keywords:RAMS 2009 Proceedings,Bayesian Analysis, Demonstration Tests, Design Reliability

Product Robust Design via Accelerated Degradation Tests

by Sanches, Luis Mejia; Pan, Rong

In this paper, a methodology is developed for achieving product robust design via ADTs...

  • Filetype: pdf
  • Publish date: 2009-02
  • Keywords:RAMS 2009 Proceedings,Accelerated Life Testing, Degradation, Design Reliability

Reliability Analysis Techniques: How They Relate To Aircraft Certification

by Saglimbene, Mark

Classic reliability analysis techniques, namely, Reliability Prediction, Fault Tree Analysis (FTA) and Failure Mode Effect Analysis (FMEA) are the framework for the aircraft certification process...

  • Filetype: pdf
  • Publish date: 2009-02
  • Keywords:RAMS 2009 Proceedings,Design Reliability, Safety and Risk Management, Product Development and Recall

Achieving World-Class Reliability in General Aviation’s Supply Chain

by Hamada, Murad; Jarrell, Glenn

This paper presents a fresh look at what corporations in general need to do to establish a comprehensive reliability program..

  • Filetype: pdf
  • Publish date: 2009-02
  • Keywords:RAMS 2009 Proceedings,Process Design/Reliability, Process Management

Predicting Reliability Investment to Achieve Given Reliability Improvement

by Forbes, James A.; Lee, David A.; Long, E. Andrew

This paper reports on the development of a mathematical model that can be used to predict the investment in reliability required to achieve a given amount of reliability improvement...

  • Filetype: pdf
  • Publish date: 2009-02
  • Keywords:RAMS 2009 Proceedings,Process Design/Reliability, Life Cycle Cost, Reliability Model

Failure Analysis of FMEA

by Bluvband, Zigmund M.; Grabov, Pavel

This article proposes proven solutions that support the entire end-to-end FMEA sequence of activities (from the point of initiation of the analysis - Failure Modes identification – up to its culmination – evaluation of the effectiveness of the.....

  • Filetype: pdf
  • Publish date: 2009-02
  • Keywords:RAMS 2009 Proceedings,FMEA, Design Reliability, Failure Analysis

Improving Reliability Studies With SysML

by David, Pierre; Idasiak, Vincent; Fratz, Frederic

In this paper, we introduce a methodology for the reliability analysis of complex systems during their design...

  • Filetype: pdf
  • Publish date: 2009-02
  • Keywords:RAMS 2009 Proceedings,Design Reliability, FMEA, System Reliability, Reliability Model

Reducing Corrosion Costs through Reliability Centered Design

by Rose, David H.

To ensure that potential cost reductions are maximized, the discipline employing these proposed tools must currently play an active role in product design and sustainment, and the tools must be integrated into currently accepted practices...

  • Filetype: pdf
  • Publish date: 2008-02
  • Keywords:RAMS 2008 Proceedings,Design Reliability, Life Cycle Cost, Failure Analysis

ASQ News