Library

A Risk Evaluation Approach for Safety in Aerospace Preliminary Design

by Fragola, Joseph R.; Putney, Blake F.; Go, Susie; Mathias, Donovan L.

Annual Reliability and Maintainability Symposium (RAMS), 2003 Proceedings. Session 8A: Probabilistic Risk Assessment. Moderator: Robert R. Graber - SAIC...

  • Filetype: pdf
  • Publish date: 2003-06
  • Keywords:RAMS 2003 Proceedings,Risk Assessment, Reliability Design

Automatic Generation of Diagnostic Expert Systems From Fault Trees

by Assaf, Tariq; Dugan, Joanne Bechta

Annual Reliability and Maintainability Symposium (RAMS), 2003 Proceedings. Session 7C: Safety and Risk Management. Moderator: Charles Plotkin - Ford Motor Company...

  • Filetype: pdf
  • Publish date: 2003-06
  • Keywords:RAMS 2003 Proceedings,Safety and Risk Management, Fault Tree Analysis, Event Tree, Design Reliability

A Method for Reliability Optimization Through Degradation Analysis and Robust Design

by Bogaard, Johannes A. van den; Shreeram, Jaya; Brombacher, Aarnout C.

Annual Reliability and Maintainability Symposium (RAMS), 2003 Proceedings. Session 5D: Product Design and Assurance. Moderator: Vasiliy Krivtsov - Ford Motor Company...

  • Filetype: pdf
  • Publish date: 2003-06
  • Keywords:Reliability Model, Reliability Analysis/Prediction/Estimation, Design Reliability, RAMS 2003 Proceedings

Physics of Failure as an Integrated Part of Design for Reliability

by Snook, Ian; Marshall, Jane M.; Newman, Robert M.

Annual Reliability and Maintainability Symposium (RAMS), 2003 Proceedings. Session 5D: Product Design and Assurance. Moderator: Vasiliy Krivtsov - Ford Motor Company...

  • Filetype: pdf
  • Publish date: 2003-06
  • Keywords:Failure Analysis/Physics of Failure, Design Reliability, Reliability Model, RAMS 2003 Proceedings

Optimal Reliability Design of Process Systems at the Conceptual Stage of Design

by Goel, Harish; Grievink, Johan; Herder, Paulien; Weijnen, Margot

Annual Reliability and Maintainability Symposium (RAMS), 2003 Proceedings. Session 5D: Product Design and Assurance. Moderator: Vasiliy Krivtsov - Ford Motor Company...

  • Filetype: pdf
  • Publish date: 2003-06
  • Keywords:Reliability Block Diagram, Availability, Process Improvement Tools,Product Design, RAMS 2003 Proceedings

Robust Reliability Design of Diagnostic Systems

by Guangbin Yang and Ziad Zaghati

Annual Reliability and Maintainability Symposium (RAMS), 2003 Proceedings. Session 5D: Product Design and Assurance. Moderator: Vasiliy Krivtsov - Ford Motor Company...

  • Filetype: pdf
  • Publish date: 2003-06
  • Keywords:Product Reliability, System Reliability, Reliability Analysis,Product Design, RAMS 2003 Proceedings

Optimal Cost-Effective Design of Parallel Systems Subject to Imperfect Fault-Coverage

by Amari, Suprasad; McLaughlin, Leland; Yadlapati, Bhanu

Annual Reliability and Maintainability Symposium (RAMS), 2003 Proceedings. Session 5C: Software Reliability. Moderator: Christian K. Hansen - Eastern Washington University...

  • Filetype: pdf
  • Publish date: 2003-06
  • Keywords:Fault Tree Analysis, Support Costs, Redundancy, Design Reliability,Software Reliability, RAMS 2003 Proceedings

Reliability Engineering As a Practical Application to Improving System Performance – From Concept to System Retirement

by Sean D. Carter; Daniel M. Deans;

Reliability, availability, and maintainability (RAM) are three very important and necessary disciplines that must be applied within the system engineering process to ensure program success...

  • Filetype: pdf
  • Copyright: 2011
  • Keywords:Design Reliability, Maintainability, Product Development, RAMS 2011 Proceedings, Reliability

ASQ News